- Complete tear down to bare frame.
|
- Color-code all water hoses for supply and return.
|
- Sand blast to remove all rust and old paint.
|
- Replace all worn bushings, pins and shafts.
|
- Paint equipment with mil-spec oil and chemical
resistant paint to
preserve appearance for years to come.
|
- Replace all micarta insulation to assure no leaks to ground.
|
- Rebuild air cylinders, replace seals and packings, hone cylinder wall.
|
- Clean all secondary copper.
|
- Install new filter, regulator, lubricator and gauge. Completely
plumb with new hoses, fittings and clamps.
|
- Silver plate all mating surfaces from transformer to electrode holders.
|
- Install new aluminum water manifolds with flow regulator valves and flow
indicators for positive water flow through every cooling circuit.
|
- Automatically activated lighting system when back of transformer
compartment and control cabinet door opens for ease of maintenance.
|
- Clean, varnish and rebake transformer.
|
- Quality craftsmanship and ease of maintenance is our first priority.
|
- Incorporate flow monitoring system so that machine will not operate
without cooling water.
|
- We purchase used machines.
|
![cards[1].gif (4270 bytes)](_borders/cards1.gif){kind=small}